For a long time, I have been wanting to have a way to watch and capture our family’s old Super 8 Films. We have quite a few, some with audio that should be captured.
There are quite a few requirements to make this work including capturing sound. Super 8 Capture (or telecine) can be quite complex. This is part 1 to look at the projector and what we will do to provide these features.
In this blog, I will take you through getting a couple of phones working to make a simple Intercom. WE will cover off the basic connection, then look at a couple of different ways to enhance the basic implementation. Using this knowledge, you could extend the use to being a smart interface for your home automation, or even a different form of smart assistant.
From 1st February AWS will introduce a charge for every Public IPv4 address used, but how is AWS tracking with using IPv6 IP Addresses themselves? Lets take a look at how far IPv6 is used for AWS Services.
A DMX512 controlled Bollard light built on a Raspberry Pi Pico. This is a small board to fit into garden lighting, using the DMX512 protocol used in commerical lighting. This protocol is robust and can be transmitted a fair way making it perfect for garden lighting.
A simple 2 hour build to enable an Ikea Vindriktning to be turned into a remote air quality sensor on WiFi
This project provides two 8-bit ISA Slots to the Sharp PC-4600 (PC-4602/PC-4641) laptop computer systems.